In August-September 2019, PlaySmart embarked on this exciting opportunity. The stite owners chose our experienced team to install a massive wetpour playground project on a Willmott Dixon home development site in Aberfeldy, London.
Our team’s installation took 11 days, while the whole project lasted a couple of weeks. This was due to a number of set backs, namely:
- The weather can have a big impact on installations, and this project was influenced by heavy rain. Therefore, we had to reschedule the wetpour playground project multiple times.
- Midway through installation, we received some additional top layer wet pour … but … this was the wrong colour!
However, the team powered through and managed to do an excellent job on the wetpour playground project installation.
You can see the full installation process our expert team took in the photo story below:
Step 1- Base Installed
Our team installed the red base wet pour across the whole area, and drew lines out for the shapes and colours of the top layer design.
Step 2- Wetpour Layer 1 Installed and Cut
The red and orange top layer wet pour has been installed and cut to shape. We took this photo midway through this stage, just before we had new materials sent in.
Step 3- Wetpour Layer 2 Installed
Our team took this photo mid-installation of the yellow-cream colour wetpour sections.
Step 4- Project Finished!
Finally, the project was complete. Contractors fitted the wooden ramp onto the area and planted some shrubbery for the finishing touches of the play area.
Our team is very proud of our work in Aberfeldy. We were able to overcome multiple problems to produce a truly mindblowing and vibrant result.
To choose PlaySmart for your own outdoor playground project you can contact us in the form at the top of the page or at 01563 742811.